Instruction manual

26
2 Check that the camera is turned on.
[PC CONNECTION] will be displayed on the
camera’s LCD monitor.
3 Click on or in the RICOH Gate
window.
mm
mm
See “Functions of the RICOH Gate Buttons” (p.23).
The files in the camera will be saved in the specified
folder in accordance with the settings registered on the
button which was clicked.
• If [Turn off camera after saving] is selected in the Save button
settings, the confirmation message will be displayed and the
camera will be turned off immediately after [OK] is selected.
mm
mm
See “Changing the Save Button Settings” (p.26).
.
You can change the settings registered on the Save 1 and
Save 2 buttons.
Using the save settings, you can specify the saving method,
such as saving the file in the camera as it is, or downloading
the still picture file onto a Macintosh after changing the file
format, image size, etc.
1 Click on or in the RICOH Gate
window while pressing the Control key.
mm
mm
See “Functions of the RICOH Gate Buttons” (p.23).
The [Save 1] or [Save 2] dialog will be displayed.
2 If you want to change the still image
format, select the format from [Save
Format].
If you do not want to change the file format, proceed
to Step 4.
Changing the Save Button Settings
• If the camera is not correctly
connected to the Macintosh,
a message will be displayed.
Check the connection.
Note
Note