Owner's Manual

ManualsBrandsRicoh ManualsCamerasRicoh Caplio RR10

Introduction

Thank you for purchasing a Ricoh product. This manual explains the correct handling procedures

and precautions for your camera. To ensure the best performance, please read the manual

thoroughly before using the camera. Keep the manual handy for quick future reference.

Ricoh Co., Ltd.

• This publication may not be reproduced in whole or part without the express written permission of Ricoh.

• Ricoh reserves the right to change the contents of this publication without notice.

• Considerable care was taken in preparing this manual. If, however, you have questions about any part of

the manual, or note mistakes or inaccuracies, please contact us at the address listed on the back cover.

Microsoft, MS and Windows are registered trademarks of Microsoft Corporation in the United States of

America and other countries.

Macintosh is a registered trademark of Apple Computer, Inc., in the United States of America and other

countries.

is a trademark.

All trademarked company and product names mentioned in this manual are the property of their respective

owners.

Test Shots

Check that your camera is recording the images correctly by taking a number of test shots.

Reproduction or alteration of copyrighted documents, magazines, music and other materials,

other than for personal, home or similarly limited purposes, without the consent of the copyright

holder is prohibited.

Exemption from Liability

Ricoh Co., Ltd. assumes no liability for failure to record or play back images caused by

malfunction of this product.

Warranty

This product is manufactured to local speciﬁcations and the warranty is valid within the country of

purchase. Should the product fail or malfunction while you are abroad, the manufacturer

assumes no responsibility for servicing the product locally or bearing the expenditure incurred

therefor.

Radio Interference

Operating this product in the vicinity of other electronic equipment may adversely affect the

performance of both devices. In particular, operating the camera close to a radio or television

may lead to interference. If interference occurs, follow the procedures below.

– Move the camera as far away as possible from the TV, radio or other device

– Reorient the TV or radio antenna.

– Plug the devices into separate electrical outlets.

Summary of content (19 pages)

PAGE 1
Introduction Thank you for purchasing a Ricoh product. This manual explains the correct handling procedures and precautions for your camera. To ensure the best performance, please read the manual thoroughly before using the camera. Keep the manual handy for quick future reference. Ricoh Co., Ltd. Test Shots Check that your camera is recording the images correctly by taking a number of test shots.
PAGE 2
How to Read the Operation Manuals The following operation manuals are supplied with this camera. Refer to the appropriate manual for instructions relating to the required operation. Open the package Check the contents of the package. (p.2) Basic operation Digital Camera Operation Manual (this manual) This manual explains how to operate the camera, from the preparations that are necessary before using the camera to instructions on how to use the various shooting functions and play back files.
PAGE 3
Checking the Package Contents Check that your digital camera comes complete with the following items. Read the warranty card and keep it in a safe place.
PAGE 4
SD memory card 8MB CD-ROM (software) Soft case Wrist strap Software Agreement Warranty card Operation manuals 3
PAGE 5
Contents How to Read the Operation Manuals............................................................1 Checking the Package Contents...................................................................2 Basic Operation/Quick Reference.................................................................8 Getting Started.......................................................................................................... 8 Shooting ...............................................................................
PAGE 6
White Balance ......................................................................................................... 54 Macro Mode............................................................................................................ 55 Images with Voice Memo........................................................................................ 57 Manual Focus.......................................................................................................... 58 Date Imprint Mode .............
PAGE 7
System Configuration ...............................................................................116 Optional Accessories ................................................................................117 Handling Precautions................................................................................118 Care and Storage......................................................................................119 Specifications...............................................................................
PAGE 8
7
PAGE 9
Basic Operation/Quick Reference This section explains basic operation of the camera. For more detailed information, refer to the reference page mentioned. Getting Started Battery 1 SD memory card Load the battery. (p.21) Slide open the battery cover and load the battery. * Charge the battery before loading it in the camera. (p.22) 2 Insert a storage media. (p.26) Slide the card cover switch to open the card cover and insert an SD memory card.
PAGE 10
Shooting 25 N 1600 2001/07/15 11:25 1 2 3 4 5 Turn on the camera. (p.30) Slide the power switch to turn on the camera. Set the mode dial to [ ]. (p.31) Select the PIC (image quality) mode. (p.38) Press the PIC button to select the image quality mode. Compose the picture. (p.38) Press the button to make the subject larger and the button to make the subject smaller. Record the image. (p.
PAGE 11
Playback 5/26 100-0005 1600 2001/07/15 11:25 1 2 3 Turn on the camera. (p.30) Slide the power switch to turn on the camera. Set the mode dial to [ ]. (p.31) Select a file. (p.70) Press the button to display the previous file and the next file. button to display the ● Displaying Multiple Files (Thumbnail Display) (p.76) 1 2 Set the mode dial to [ ] and press the MENU button. Press the button to select and press the ENTER button. THUMBNAIL 3 Press the , , or button to change the file.
PAGE 12
Erasing DELETE ONE MENU 1 2 3 4 5 Turn on the camera. (p.30) Slide the power switch to turn the camera on. Set the mode dial to [ ]. (p.31) Select the file you want to delete and press the MENU button. (p.93) Press the button to display the previous file and the button to display the next file. Check that the symbol is highlighted and press the ENTER button. (p.93) Press the shutter release button.
PAGE 13
Names of Parts ■ Camera Front Shutter release button (p.36) Power switch (p.30) Flash sensor Flash Lens Charging lamp (p.23) (Blinks when connected to PC.) Back DIGITAL terminal cover switch (p.74) DIGITAL terminal cover (p.74) DIGITAL (AV/USB) terminal (p.74) Battery cover (p.21) Card cover (p.26) Card cover switch (p.26) Reset switch (p.113) 12 Wrist strap eyelet (p.20) Power supply terminal (DC-input) cover (p.
PAGE 14
Operating parts button (p.51) button PIC button (p.38) /Zoom button ( ) (p.38) Speaker (p.71) Mode dial (p.31) Earphone terminal Microphone LCD monitor (p.32, p.36) ■ RICOH BASE Camera setting parts Flash LED Autofocus LED MENU/ENTER button CANCEL button DISPLAY button ■ Arm (Required when the camera is connected to a PC) Remote control reception START key Power supply terminal (DC-input) (p.105) ■ AC adapter AC-3 DIGITAL (AV/USB) terminal (p.
PAGE 15
Safety Precautions Warning Symbols Various symbols are used throughout this instruction manual and on the product to prevent physical harm to you or other people and damage to property. The symbols and their meanings are explained below. Danger This symbol indicates matters that may lead to imminent risk of death or serious injury if ignored or incorrectly handled. Warning This symbol indicates matters that may lead to death or serious injury if ignored or incorrectly handled.
PAGE 16
Observe the following precautions to ensure safe use of this equipment. Danger ● Do not attempt to disassemble, repair or alter the equipment yourself. The high-voltage circuitry in the equipment poses significant electrical hazard. ● Do not attempt to disassemble, alter or directly solder the battery. ● Do not put the battery in a fire, attempt to heat it, use it in a high temperature environment such as next to a fire or inside a car, or abandon it.
PAGE 17
Warning ● Avoid any contact with the liquid crystal inside the LCD monitor, should the monitor be damaged. Follow the emergency measures below in the following circumstances. • SKIN: If any of the liquid crystal gets on your skin, wipe it off and rinse the affected area thoroughly with water, then wash well with soap. • EYES: If it gets in your eyes, wash your eyes with clean water for at least 15 minutes and seek medical advice immediately.
PAGE 18
Warning ● Do not use the equipment in the bathroom or shower as this could result in fire or electric shock. ● Do not use the equipment near flammable gases, gasoline, benzine, thinner or similar substances to avoid the risk of explosion, fire or burns. ● Do not use the equipment in aircraft or other locations where usage is restricted or prohibited as this may lead to disasters or accidents. ● Wipe off any dust that accumulates on the electrical plug as this may lead to fire.
PAGE 19
Observe the following precautions to ensure safe use of this unit. Caution ● Contact with fluid leaking from a battery can lead to burns. If part of your body comes in contact with a damaged battery, wash the area with water immediately. (Do not use soap.) If a battery starts to leak, remove it immediately from the equipment and wipe the battery chamber thoroughly before replacing it with a new battery. ● Plug the power cords securely into the electrical outlets. Loose cords pose a fire hazard.