User guide

Changing Camera Settings

Note

• Once the power is turned off or change the mode, the Quick Review function can no longer

recall the most recently taken image.

• When the Power-Save mode is set to ON, if the power is turned on or the mode dial is

turned to another position, a warning appears for about two seconds to indicate Power-

Save mode.

• Pressing the F (Flash) button allows you to turn the LCD Monitor Display on, and then

change the flash setting (see P.32). Press the shutter button or O button to turn the LCD

Monitor Display off.

Caution

If you have activated Power-Save mode, power consumption will be reduced, but there are

the following limitations:

• Processing time may be slower.

• It works only in Still Image/Movie modes. It does not work in Playback Mode.