Specifications

6-26 DDP92/184 Finisher Maintenance Manual
M M L 0 0
6.2.7. Removal of the Cover Sheet Feeder
Applicable jigs and tools: +Screwdriver.
[Disassembling Procedures]
1. Remove the Top Cover. (Refer to item 6.1.4 on page 6-4)
2. Remove the Rear Cover. (Refer to item 6.1.2 on page 6-2)
3. Remove the 3 connectors.
4. Remove the 6 screws and the Cover Sheet Feeder.
Figure 6-44. Removal of the Cover Sheet Feeder
[Assembling Procedures]
1. Reinstall the Cover Sheet Feeder reversing the procedure above.
2. When installing the Cover Sheet Feeder, make sure to position it by pushing to
toward the printer side.
Figure 6-45. Removal of the Cover Sheet Feeder
CAUTION:
Be sure to turn OFF the MAIN AC POWER prior to performing the maintenance.