Specifications

6-52 DDP92/184 Finisher Maintenance Manual
M M L 0 0
6.3.17. Adjusting the Stapler Vertical Positioning
Applicable jigs and tools: +Screwdriver, Jig.
[Preparation]
1. When replacing or reinstalling a stapler or clincher, adjust the vertical alignment
as de-scribed below.
[Adjustment Procedures]
1. If installing a stapler, mount the stapler into place.
2. Loosely fasten the clincher in place with 4 set screws. (If the clincher is already
fastened in place, loosen the 4 screws so that you can adjust it.)
3. Remove the plate from the jig.
4. Remove the cartridge, and install the plate that you took from the jig.
5. Reinstall the cartridge.
Figure 6-76. Adjustment of the Stapler Vertical Positioning
CAUTION:
Be sure to turn OFF the MAIN AC POWER prior to performing the maintenance.