Specifications

Disassembling, Assembling & Adjustment 6-61
M M L 0 0
6.3.23. Adjusting the Stapling-and-Folding stopper (Stapling position)
The Engine has the Adjustment value of the Stapling-and-Folding Stopper position on
the memory shown below. For details of relation for adjustment value and data, refer
to “SUPPLEMENT 1 - Adjustment value and data of Stapling / Folding position”.
The position can be changed if you rewritethe Adjustment data by the Maintenance
Panel.
For Example
Adjusting the Stapling-and-Folding Stopper downward by 0.5mm from the current
position in case of Letter_SEF paper.
Execute the following procedure by the Maintenance Panel referring to “SUPPLE-
MENT 1 - Adjustment value and data of Stapling / Folding position”.
After this procedure the Stapling position is adjusted toward the left direction by
0.5mm from the former position.
Stapling-and-Folding Stopper position data
Paper size Address Default
Letter_SEF 9580 80HEX
B4_SEF 9581 80HEX
A4_SEF 9582 80HEX
A3_SEF 9583 80HEX
Legal14_SEF 9584 80HEX
Ledger_SEF 9585 80HEX
Others 9586 80HEX
ADJUSTMENT START
PUSH ENTER KEY FOR 2
SECONDS
THE STATE THAT DEPENDS ON
ROUTINE NO. SELECTION.
INPUT "A6" TO MAINTENANCE
PANEL WITH DATA KEY.
PUSH ENTER KEY.
THE STATE THAT DEPENDS ON
CPU SELECTION
INPUT "01" TO THE MAINTENANCE
PANEL WITH DATA KEY.
INDICATION OF DISPLAY
ROUTINE NO.
MASTER:01,SLAVE:02