Specifications

7-8 DDP92/184 Finisher Maintenance Manual
M M L 0 0
7.3.5. Staple Mode
(1.) The gate switches to the staple mode.
(2.) For A4R paper and above, the paper exit opening opens.
(3.) The first set of paper is conveyed and stacked.
1.) The stacker section roller sends the paper to the flat-stapling stopper and
the paper is lined up in the lengthwise direction.
2.) The upper alignment plate lines up paper in the widthwise direction.
3.) Paper is stapled.
4.) The first set is conveyed by the paper exit arm and exited to the main tray.
Figure 7-10. View of the Staple Mode