Specifications

Preventive Maintenance 4-3
M M L 0 0
4.3. Procedure of Replacing the Parts for Periodical Replacement
4.3.1. Replacing the Paper Exit Roller
Applicable jigs and tools: Jewel Screwdriver.
[Disassembling Procedures]
1. Push the Tray Upper-limit Sensor beside the Paper Exit Roller, then the Main Tray
goes down.
2. Open the Front Cover to make the Main Tray stopped.
3. Turn OFF the MAIN AC POWER.
Figure 4-1. Removal of the Paper Exit Roller
4. Insert the end of a screwdriver into the slot of the Paper Exit Roller, and twist the
screwdriver to pry the roller open.
Figure 4-2. Removal of the Paper Exit Roller