User's Manual

Starting the Machine
17
1
Starting the Machine
To start the machine, turn on the
power switch.
Note
This machine automatically enters
Energy Saver mode if you do not
use the machine for a while.
Turning On the Power
A
AA
A
Confirm that the power cord is
plugged into the outlet firmly.
B
BB
B
Turn on the power switch.
Turning Off the Power
Important
Make sure that 100% is shown on
the Fax standby display before you
turn off the power switch or you
unplug the power cord. Fax files
programed in memory will be de-
leted 12 hours or more after you
turn off the power switch or you
unplug the power cord. The stor-
age time might be shorter if the
surrounding temperature is low or
the machine has been on for less
than a week.
Fax files programmed in memory
will not be deleted while the op-
tional memory card is installed.
When you install the memory card
to the machine, make sure that
100% is shown on the display and
turn off the power switch.
A
AA
A
Turn off the power switch.
StellaF15_EN_Combine_F1_Pre_FM.book Page 17 Friday, August 27, 2004 6:22 PM