User's Manual

Reading the Display
19
1
Standby Display
While the machine is in standby dis-
play (immediately after it is turned on
or after the {
{{
{Cancel}
}}
} key is pressed),
the following display is shown.
Note
❒ To return the machine to standby
display, do one of the following:
• If you have set the original and
have not pressed the {
{{
{Start}
}}
} key,
remove the original.
• If you have not set an original,
press the {
{{
{Cancel}
}}
} key.
• If you are in User Tools mode,
press the {
{{
{User Tools}
}}
} key or the
{
{{
{Cancel}
}}
} key.
Communication Display
While the machine is communicating,
the status is displayed.
❖
❖❖
❖ Display during Memory Transmission
or Reception:
The destination's name or fax
number appears on the top of the
LCD display.
Note
❒ Even when the machine is send-
ing or receiving a fax message
from/into memory, you can
still scan the next original into
memory.
❖
❖❖
❖ Immediate Transmission:
Display Prompts
Depending on the situation, the ma-
chine will show various prompts on
the display.
❖
❖❖
❖ Instructions and Requests
❖
❖❖
❖ Questions
❖
❖❖
❖ Selections
❖
❖❖
❖ Status
StellaF15_EN_Combine_F1_Pre_FM.book Page 19 Friday, August 27, 2004 6:22 PM