User`s guide

Chapter C
C - 2
No OPC Belt The OPC belt cartridge is not installed. Install the OPC belt cartridge. (See Replacing the OPC
belt cartridge (Photo Conductor Unit Type 140) on
page C-33.)
No Paper Fed The machine is out of paper or paper
is not properly loaded in the indicated
paper tray.
Refill the paper in the paper tray.
—OR—
Remove the paper and load it again.
No Response/Busy The number you dialled does not
answer or is busy.
Verify the number and try again.
No Toner X
X = C, M, Y, K
(K: Black, C: Cyan,
M: Magenta,
Y: Yellow)
The toner cartridge is not installed
properly.
Reinstall the X toner cartridge. (See the Quick Setup
Guide.)
Not Registered You tried to access a One-Touch or
Speed Dial number that is not
programmed.
Set up the One-Touch or Speed Dial number. (See
Storing One-Touch Dial numbers on page 7-3 and
Storing Speed-Dial numbers on page 7-4.)
Out of Memory The machine’s memory is full. (Fax sending or copy operation in progress)
Press Mono Start or Colour Start to send or copy the
scanned pages.
—OR—
Press Stop/Exit and wait until the other operations in
progress have finished and then try again.
—OR—
Clear the faxes from the memory. (See Out of Memory
message on page 5-2.)
(Printing operation in progress)
Reduce print resolution. (See Advanced tab in the
Software User’s Guide on the CD-ROM.)
—OR—
Clear the faxes from the memory. (See Out of Memory
message on page 5-2.)
—OR—
Add more memory. (See Installing additional memory
on page D-3.)
Paper Jam A1
Paper Jam A2
Paper Jam B
Paper Jam C
Remove the jammed paper. See the
alphanumerical diagram to check on
the location.
See Paper jams on page C-6.
Replace 120K Kit It is time to replace the 120K kit. Call your dealer or Customer Service to replace the
120K kit.
Replace Fuser It is time to replace the fusing unit. Replace the fusing unit. Although printing is still
possible when this message appears, replace the
fusing unit as soon as possible to ensure the print
quality. Contact your sales or service representative.
Replace OPC Belt It is time to replace the OPC belt
cartridge.
Replace the OPC belt cartridge. (See Replace OPC
belt cartridge message on page C-33.)
ERROR MESSAGES
ERROR MESSAGE CAUSE ACTION