User`s guide

Troubleshooting and routine maintenance
C - 3
C
Replace PF Kit2 It is time to replace the PF kit2. Call your dealer or Customer Service to replace the PF
kit2.
Stacker Full The output tray is full of paper. Remove the paper from the output tray.
Toner Empty X
X = C, M, Y, K
The toner is used up and printing is
not possible.
Replace the used toner cartridge with a new one. (See
Replacing a toner cartridge on page C-29.)
Toner Error The machine has detected an
incompatible toner cartridge.
Use only our genuine toner cartridges.
Toner Low X
X = C, M, Y, K
The indicated colour toner is nearly
empty.
Order a new toner cartridge now.
Unable to Init.
Unable to Print
Unable to Scan
The machine has a mechanical
problem.
Turn off the machine's power switch and then on
again. If the error message continues leave the
machine for several minutes and then try it again. (The
machine can be turned off for up to 60 hours without
losing faxes stored in the memory. If the machine will
be off longer than 60 hours, you can save the faxes in
your PC. See Transferring faxes to your PC on page
C-4.)
Waste Toner Full The waste toner pack is full. Replace the waste toner pack. (See Replacing the
waste toner pack on page C-32.)
ERROR MESSAGES
ERROR MESSAGE CAUSE ACTION