User`s guide

Chapter 5
5 - 5
Changing fax Resolution
After you load the document, you can use
Resolution to change the setting temporarily
(for this fax only). In Fax mode , press
Resolution and
▲ or ▼ to select the setting
you want, and then press Menu/Set.
—OR—
You can change the default setting.
1
If it is not illuminated in blue, press
(Fax).
2
Press Menu/Set, 2, 2, 2.
3
Press ▲ or ▼ to select the resolution
you want.
Press Menu/Set.
Note
You can choose four different resolution
settings for monochrome faxes.
Real Time Transmission
When you are sending a fax, the machine will
scan the document into the memory before
sending. Then, as soon as the phone line is
free, the machine will start dialling and
sending.
If the memory is full, the machine will send the
document in real time (even if
Real Time TX is set to Off).
Sometimes, you may want to send an
important document immediately, without
waiting for memory transmission. You can set
Real Time TX to On for all documents or
Next Fax:On for the next fax only.
Sending in real time for all faxes
1
If it is not illuminated in blue, press
(Fax).
2
Press Menu/Set, 2, 2, 5.
3
Press ▲ or ▼ to select On (or Off).
Press Menu/Set.
Standard Suitable for most typed
documents.
Fine Good for small print and
transmits a little slower than
Standard resolution.
S.Fine Good for small print or
artwork and transmits
slower than Fine resolution.
Photo Use when the document
has varying shades of grey
or is a photograph. This has
the slowest transmission
time.
Setup Send
2.Fax Resolution
Setup Send
5.Real Time TX