User`s guide

Chapter 6
6 - 5
Changing the remote codes
Remote activation lets you send commands
to your machine from an extension or
external phone. To use Remote Activation,
you must turn on the remote codes. The
preset Fax Receive Code is 51. The preset
Telephone Answer Code is #51. If you want
to, you can replace them with your own
codes.
1
If it is not illuminated in blue, press
(Fax).
2
Press Menu/Set, 2, 1, 4.
3
Press ▲ or ▼ to select On (or Off).
Press Menu/Set.
4
Enter the new Fax Receive Code.
Press Menu/Set.
5
Enter the new Telephone Answer Code.
Press Menu/Set.
6
Press Stop/Exit.
Note
■ If you are always disconnected when
accessing your external TAD remotely, try
changing the Fax Receive Code and
Telephone Answer Code to another
three-digit code using the numbers 0-9,
, #.
■ Remote Codes might not work with some
telephone systems.
Fax Detect
When you use this feature, you do not have to
press Mono Start, or the Fax Receive Code
51 when you answer a fax call. Selecting
On allows the machine to receive fax calls
automatically, even if you lift the handset of
an extension or external phone. When you
see
Receiving on the LCD or when you
hear ‘chirps’ through the handset of an
extension phone connected to another wall
socket/phone socket, just replace the
handset and your machine will do the rest.
Note
■ If your machine does not connect a fax call
when you lift an extension or external
phone handset (either this feature is set to
Off or due to telephone line problems),
you will need to activate the machine
manually. You can do this by pressing
Mono Start on the machine.
—OR—
by pressing 51 if you are not at your
machine. (See Operation from extension
telephones on page 6-6.)
■ If you send faxes from a computer on the
same phone line and the machine
intercepts them, set Fax Detect to
Off.
1
If it is not illuminated in blue, press
(Fax).
2
Press Menu/Set, 2, 1, 3.
3
Use ▲ or ▼ to select On (or Off).
Press Menu/Set.
4
Press Stop/Exit.
Setup Receive
4.Remote Code
Setup Receive
3.Fax Detect