User`s guide

Receiving a fax
6 - 6
6
Additional receiving
operations
Printing a fax from the
memory
If you have selected Fax Storage
(Menu/Set, 2, 5, 1), you can still print a fax
from the memory when you are at your
machine. (See Fax Storage on page 8-1.)
1
Press Menu/Set, 2, 5, 3.
2
Press Mono Start.
Setting the Print Density
You can adjust print density, making your
printed pages darker or lighter.
1
If it is not illuminated in blue, press
(Fax).
2
Press Menu/Set, 2, 1, 7.
3
Press ▲ to make the print darker.
—OR—
Press
▼ to make the print lighter.
Press Menu/Set.
4
Press Stop/Exit.
Operation from extension
telephones
If you answer a fax call on an extension
telephone, or an external telephone that is
correctly connected to the machine, you can
make your machine take the call by using the
Fax Receive Code. When you press the Fax
Receive Code 51, the machine starts to
receive the fax.
If the machine answers a voice call and
pseudo/double-rings for you to take over, use
the Telephone Answer Code #51 to take the
call at an extension phone. (See F/T Ring
Time (Fax/Tel mode only) on page 6-3.)
If you answer a call and no one is on the line,
you should assume that you’re receiving a
manual fax.
■ If you want to use Remote Activation, you
have to turn on the remote codes. (See
Changing the remote codes on page 6-5.)
Press 51 and wait for the chirp or until
the machine’s LCD displays
Receiving,
and then hang up.
Note
You can also use the Fax Detect feature to
make your machine automatically take the
call. (See Fax Detect on page 6-5.)
Remote Fax Opt
3.Print Document
Setup Receive
7.Print Density