User`s guide

Polling
10 - 2
10
Setup to receive delayed
polling
You can set the machine to begin Polling
Receive at a later time.
1
If it is not illuminated in blue, press
(Fax).
2
Press Menu/Set, 2, 1, 8.
3
Press ▲ or ▼ to select Timer.
Press Menu/Set.
4
Enter the time (in 24-hour format) you
want to begin polling.
For example, enter 21:45 for 9:45 PM.
5
Press Menu/Set.
6
Enter the fax number you are polling.
Press Mono Start.
The machine makes the polling call at
the time you entered.
Note
You can set up only one Delayed Polling
operation at a time.
Sequential Polling
The machine can request documents from
several fax units in a single operation. You
just specify several destinations in Step 5.
Afterwards, a Sequential Polling Report will
be printed.
1 If it is not illuminated in blue, press
(Fax).
2
Press Menu/Set, 2, 1, 8.
3
Press ▲ or ▼ to choose Standard,
Secure or Timer.
Press Menu/Set when the screen
displays the setting you want.
4
If you selected Standard, go to Step
5.
• If you selected
Secure, enter a
four-digit number and press
Menu/Set, and then go to Step 5.
• If you selected
Timer, enter the time
(in 24-hour format) you want to begin
polling and press Menu/Set, and then
go to Step 5.
5
Specify the destination fax machines,
which you wish to poll by using
One-Touch, Speed-Dial, Search, a
Group (see Setting up Groups for
Broadcasting on page 7-5) or the dial
pad. You must press Menu/Set
between each location.
Setup Receive
8.Polling RX
Setup Receive
8.Polling RX