Specifications

USING THE SELF-TIMER
1. Press the Self-timer Button. The Self-timer LED on the f rant of your camera will light for approximately 8
seconds. Then, the LED will blink for about 2 seconds to indicate that the shutter will release soon. After a total 10
seconds have elapsed, the shutter will release (Figs. 37, 38)
* If you wish to clear the self-timer once it has started, close the Lens Shield or press the Self-timer Button again.
Using the Self-timer for Flash Photography:
a. The Flash Unit will pop up automatically when the Self-timer Button is pressed if there is insufficient light.
b. Wait for the Flash Ready Lamp to light.4www.butkus.org
c. Press the Self-timer Button again (the camera will focus) to make the exposure as described above
* For backlit subjects within 3 m from the camera the Flash Unit will pop up automatically.