Specifications

INSERTING THE BATTERY
The camera will not operate unless the battery is installed. It is important to make sure that the battery is installed
correctly.
1. Push the Battery Compartment Cover Latch by a pen etc. in the direction of the arrow and pull open the cover.
(Fig. 3)
2. Insert the 6 volt lithium battery, checking that+ and - on the battery are lined up correctly according to the polarity
diagram inside the battery compartment. (Fig. 4)
3. Close the Battery Compartment Cover by pushing it in the direction of the arrow. (Fig. 5)
* When the battery is inserted correctly, the Battery Condition Mark Am: appears on the LCD Control Panel when the
Lens Shield is opened. (Fig. 6)
* When replacing the battery, do so as quickly as possible, and avoid having film inside the camera
* Do not remove the battery from the camera unless it is to replaced with a new one.
Battery for use
Lithium battery (6 V) Panasonic BR-P2DP