Specifications

LOADING THE FILM
Always avoid direct sunlight when loading the film.
1. Push the Back Cover Latch downwards to open. (Fig. 11)
2. Load the film cassette into the Film Chamber and pull out enough film leader to extend over the mark of the film
leader position (A). (Fig. 12.A, 12.B)
3. Please make sure that the film is within the Film Guides (Fig. 13), and that the film is not slack.
(Fig. 14)
4. Press the Back Cover shut so that the Back Cover Latch returns to its original position. The film is automatically
advanced until number Hi" appears in the LCD Panel. As soon as you close the Back Cover, the LCD Panel will show
the following signs. (Fig. 15)
(1) Film Cassette loaded Symbol
(2) Film Advance Symbols (these symbols will flash in sequence toward the right to tell you the film is winding.)
(3) Exposure Counter
4. If the film has not advanced correctly and is not taken up onto the Film Take-up Spool, the Film Cassette Loaded
Symbol, the Film Advance Symbol and Exposure Counter will blink for about 30 sec. (after 30 sec., they appear
without blinking but start to blink when the Shutter Release Button is pressed and the shutter can not be released).