Specifications

Please reload the film by following steps 1--4 shown above (Fig. 16)
* Whether there is film in your camera or not can be confirmed by either the Film Loaded Window or the cartridge
symbols in the LCD Panel. (Fig. 17)
* Do not use special-purpose films such as 35 mm Instant Reversal Film, etc. because your camera may not be able to
transport and expose them properly.
* You can load film in your camera although the Lens Shield is closed. However, the LCD display is not shown.
SETTING THE FILM SPEED
DX coded films are provided with black-and-silver patterns corresponding to film speeds which the camera reads and
automatically sets. Your camera accepts DX films with speeds ranging from ISO 100 to 16w.
Please check whether the film has a DX code system or not. (Fig. 18)
When using a film with DX code setting the film speed'/ is not necessary. Your camera automatically makes the
correct film speed setting.
When using a film without DX code, your camera will automatically set itself to ISO 100.4www.butkus.org