Service manual

3.4 TONER SUPPLY CLUTCH REMOVAL
1.Turn off the main switch.
2. Remove the development unit shift clutch assembly.
3. Remove the 3 gears [A] (1 E-ring).
4. Remove the support bracket [B] (3 screws) and gear [C].
5. Remove the toner supply clutch assembly [D] (2 screws, 1 E-ring,
1 harness clamp, and 1 connector).
6. Remove the toner supply clutch [E] (1 E-ring).
Rev. 10/92
[A]
[B]
[C]
[D]
[E]
FSM 5-27 FT5733/5433