Service manual

4.5 USED TONER COLLECTION (SP83)
1. Turn off the main switch.
2. Remove the cleaning unit.
3. Set the cleaning unit on a large sheet of paper.
4. Remove the used toner tank cover [A] (2 screws).
5. Pour the used toner slowly onto the paper sheet so that the toner
does not scatter.
6. Place the paper sheet with the toner into a vinyl bag.
NOTE:Dispose according to local regulations.
7. Reinstall the used toner tank cover.
8. Reinstall the cleaning unit.
9. While pressing both "1" and "3" on the operation panel number
keys, turn on the main switch in order to access the SP mode.
NOTE:Release the number keys after confirming that the call
service indicator and the copy counter number "0" are
blinking.
10. Enter "83" using the number keys and press the enter key.
11. Enter "1" using the number keys and press the enter key.
12. Turn the main switch off.
[A]
FSM 5-33 FT5733/5433