Service manual

5. PAPER FEED
5.1 PAPER TRAY REMOVAL
1. Open the copier front door.
2. Pull out the paper tray [A] and remove the tray stopper brackets
[B], [C] on both sides as shown (1 screw each) and then remove
the paper tray from the copier.
NOTE: When removing several paper trays at a time, make sure
that the paper tray is returned to the original feeding station.
To identify the original feeding station, each paper tray has
its own decal on the right side.
(A: Copier Upper Paper Tray)
(B: Copier Lower Paper Tray)
(C: Paper Tray Unit - Tray 1)
(D: Paper Tray Unit - Tray 2)
(E: Paper Tray Unit - Tray 3)
[A]
[B]
[C]
FSM 5-35 FT5733/5433