Service manual

5.2 PAPER FEED ROLLER REPLACEMENT
5.2.1 Friction Pad Feed System (Paper Tray)
NOTE: Replace the paper feed roller and the friction pad assembly
as a set to maintain paper feeding ability.
(1) Feed Roller Replacement
1. Remove the paper tray (see Paper Tray Removal).
2. Remove the feed roller guide [A] (1 screw).
3. Remove the feed roller assembly [B] from the shaft [C].
4. Replace the feed roller hub [D] from the old to the new feed roller.
NOTE: When replacing the feed roller hub, make sure that the
projections of the hub engage with the grooves of the feed
roller.
5. Reassemble the copier.
[D]
[B]
[A]
[C]
FT5733/5433 5-36 FSM