Service manual

(2) Friction Pad Replacement
1. Pull out the paper tray.
2. Remove the friction pad holder mounting bracket [A] from the
paper tray (2 screws with washers).
3. Unhook the spring [B] from the pressure release lever.
4. Remove the friction pad assembly [C] from the mounting bracket
(1 screw and 1 swivel bushing).
5. Lubricate the sliding surface [D] of the new friction pad assembly
slightly with "Albania 2" grease.
6. Install the new friction pad assembly on the mounting bracket
and reassemble the paper tray.
NOTE: If the friction pad assembly is replaced for several paper
trays at the same time, make sure that the friction pad holder
mounting bracket is placed back to the original paper tray.
To identify the original position, the mounting bracket and the
paper tray have the identical decals such as "A", "B", ....
[D]
[C]
[B]
[A]
FSM 5-37 FT5733/5433