Service manual

5.2.2 FRR-Feed System (Manual Feed/Large Capacity Tray)
(1) Pick-up, Paper Feed, and Separation Rollers Replacement
1. Open the by-pass feed table.
2. Loosen the screw [A] and remove the by-pass feed guide plate
[B] while lifting the by-pass feed table a little.
3. Close the by-pass feed table.
4. Non-LCT machine:
Remove the right lower cover (4 screws).
LCT machine:
Lower the LCT bottom plate and remove the paper stack.
Open the LCT top cover and remove the LCT cover plate [C](2
screws).
5. Remove the pick-up roller [D] (1 snap ring).
6. While lifting up the paper end feeler [E], remove the paper feed
roller [F] (1 snap ring).
7. Remove the separation roller [G] (1 snap ring).
[B]
[A]
[E]
[F]
[D]
[G]
[C]
FT5733/5433 5-38 FSM