Service manual

5.3 BY-PASS FEED TABLE REMOVAL
1. Open the by-pass feed table.
2. Loosen the screw [A] and remove the by-pass feed guide plate
[B] while lifting the by-pass feed table a little.
3. Remove the right upper cover and the rear cover.
4. Remove the fixing screw [C] for the by-pass feed rear support pin
[D].
5. While sliding the by-pass feed rear support pin to the rear, slide
the by-pass feed table [E] off the by-pass feed front support pin
[F].
[B]
[A]
[D]
[C]
[E]
[F]
FT5733/5433 5-40 FSM