Service manual

5.7 LCT DRIVE BELT REPLACEMENT
1. Remove the right upper cover.
2. Remove the LCT front and rear covers (1 screw each).
3. Remove the right front lower and right rear lower covers (2
screws each).
4. Remove the LCT [A] from the copier (4 screws and 3 connectors).
5. Remove the belt stoppers [B] (1 screw).
6. Remove the pulley [C] (1 retaining ring).
7. Replace the LCT drive belt [D].
[A]
[B]
[D]
[C]
[B]
[D]
FSM 5-45 FT5733/5433