Service manual

5.8 LCT LIFT MOTOR REPLACEMENT
1. Remove the LCT from the copier (refer to LCT Drive Belt
Replacement).
2. Remove the motor cover plate [A] (2 screws).
3. Remove the LCT lift motor assembly [B] (4 screws, 4 rubber
rings, 1 connector).
4. Remove the E-ring [C] from the worm gear shaft.
5. Slide the bushing [D] inwards and remove the worm gear
assembly [E].
6. Remove the LCT lift motor [F] (2 screws).
[D]
[C]
[A]
[E]
[F]
[B]
FT5733/5433 5-46 FSM