Service manual

6. AROUND THE DRUM
6.1 DRUM UNIT REMOVAL
1. Open the front door and lower the transfer & separation corona
unit [A] by pulling down the release lever [B].
2. Push the development unit lock lever [C] to the right (to the lock
position).
3. Move the development release lever [D] to the right and pull the
black development unit half way out. Holding the toner supply
unit with your right hand and the bottom of the development unit
with your left hand, pull the unit all the way out. Place the unit on
a clean sheet of paper.
[A]
[B]
[C]
[D]
FSM 5-47 FT5733/5433