Service manual

7. FUSING
7.1 FUSING UNIT REMOVAL
1. Open the front cover and lower the T & S corona unit.
2. Remove the cleaning unit (see Cleaning Unit Removal).
3. Hold the fusing unit cover [A] while pushing the release lever [B],
and pull out the fusing unit [C] until it stops.
4. Remove the fusing unit lock screw [D] (1 shoulder screw).
5. Remove the fusing unit completely while pushing the release
lever.
NOTE:Before completely removing the fusing unit, support the
bottom of the fusing unit.
[D]
[B]
[C]
[A]
FSM 5-69 FT5733/5433