Service manual

7.6 THERMOFUSE REPLACEMENT
1. Remove the fusing unit (see Fusing Unit Removal).
2. Remove the fusing unit cover [A] (2 shoulder screws, 1 screw).
3. Lower the fusing exit assembly [B].
4. Remove the thermofuse harness lead [C] (1 screw) from the front
fusing lamp terminal and disconnect the thermofuse harness
from the fusing harness [D].
5. Remove the thermofuse holder [E] (1 screw) then remove the
thermofuse (2 plate clamps).
[A]
[C]
[B]
[E]
[D]
FT5733/5433 5-74 FSM