Service manual

8.3 DUPLEX FRICTION ROLLER REPLACEMENT
1. Remove the duplex unit [A] from the tray (see Duplex Unit
Removal).
2. Remove the friction roller assembly [B] (2 screws) from the
duplex unit.
3. Remove the friction rollers [C] (1 E-ring each) from the shaft [D].
4. Install new friction rollers on the shaft and reassemble the duplex
unit.
NOTE:This friction roller has a one-way clutch. Be sure to install
the roller so that it rotates in the direction of the arrow
(see illustration).
[A]
[D]
[C]
[B]
FT5733/5433 5-82 FSM