Service manual

8.4 JOGGER HOME POSITION SENSOR AND JOGGER
MOTOR REPLACEMENT
1. Pull out the duplex tray and remove the side and front inner
covers.
2. Remove the clamp [A] and sensor bracket [B] (1 screw).
3. Remove the jogger home position sensor [C] from the bracket
and replace it (1 screw and 1 connector).
4. Remove the clamp [D] and replace the jogger motor [E] (2
screws and 1 connector).
[C]
[E]
[D]
[B]
[A]
FSM 5-83 FT5733/5433