Service manual

10. If the paper did not stop at the correct position ("a"=10∼15 mm),
turn VR 103 [A] to correct the original stop timing.
NOTE: Turning VR103 clockwise results in the original stopping
later.
11. Set back DIP SW101 [B] on the main control board as follows:
ON: 101-1
OFF: 101-2,3,4
12. Reinstall the DF main control board cover [C] and the left scale.
"a"
[A]
[B]
[C]
VR 103
"a"
≤ 10∼15 mm
"a"
≥ 10∼15 mm
FSM 8-35 FT5733/5433