Service manual

6.17 PAPER FEED MOTOR SPEED CHECK AND
ADJUSTMENT
1. Remove the DF main PCB cover [A] (1 screw).
2. Set DIP SW101 [B] NO. 1, 2, and 4 to ON. Leave DIP SW 3 in
the OFF position. Then turn the main switch on.
3. If either the original set indicator [C] or the original feeding
indicator [D] is on, adjust the speed by turning VR-101. If the
original set indicator is on, turn VR-101 in the L direction. If the
original feeding indicator is on, turn VR-101 in the H direction.
Adjust until both indicators stay off for at least 5 seconds.
[B]
[D]
[C]
[A]
FT5733/5433 8-36 FSM