Service manual

6. Pass the 4P connector [A] of the key counter holder [B] through
the key counter holder access hole and couple it with the key
counter connector [C] of the copier.
7. Hold the fixing plate [D] on the inside of the key counter holder
bracket [E] and insert the key counter holder.
8. Align the holes in the fixing plate with the mounting holes of the
key counter holder and secure the key counter holder (2 screws).
NOTE: The fixing plate has three different hole sizes. Use the
holes that match those on the key counter holder that you
are installing.
9. Reinstall all the covers and check the key counter operation.
[C]
[A]
[B]
[E]
[D]
FSM 3-21 FT5733/5433