Service manual

2.6 OPTICS ANTI-CONDENSATION HEATER
INSTALLATION (OPTION)
NOTE: The optional optics anti-condensation heater keeps water
from condensing on the copier’s mirrors. Such
condensation occurs under cold and high humidity
conditions, and causes the first few copies of the day to be
black or dark. The heater is available as a service part.
Required parts:
Optics
anti-condensation heater
(P/N AX400008 for 115V area,
P/N AX400009 for 220/230/240V
area)
1 piece
Philips pan head screw
(M4 x 8)
(P/N 04340080W)
2 pieces
CAUTION: Unplug the copier power cord before starting the
following procedure.
1. Open the front door and pull out the 1st and 2nd (or the paper
and duplex) trays.
2. Remove the left and front side screws [A] of the front upper cover
[B] and remove the left cover [C] (5 screws).
3. Remove the left scale [D] (2 shoulder screws) and the exposure
glass [E].
[D]
[C]
[E]
[B]
[A]
FSM 3-25 FT5733/5433