Owner's Manual

Exterior: Rear View
3
1
Exterior: Rear View
This section explains names and functions of the parts on the rear side of the
printer.
1. Upper output guide
Takes prints to the upper output stacker.
2. Vents
Prevent overheating.
3. Anti-humidity heater switch
Turn this switch to On when operating
this machine in humid conditions. The
anti-humidity heater prevents roll and
tray paper absorbing moisture.
4. Upper output exit
When the upper output is selected, out-
put paper is delivered here with the print
side facing the user.
5. Lower output exit
When the lower output is selected, out-
put prints are delivered here with the
print side up.
6. Controller board
Attach the interface cable, network cable,
or USB cable here.
7. Lower output guides
Prevent delivered paper being stacked at
an angle when the lower output is select-
ed.
8. Lower output tray
Delivers prints from the lower output ex-
it, and then sends them to the lower out-
put stacker.
BAL008S