Owner's Manual

4
The program indicator(LED) lights after
you store the setting.
11. {
{{
{Function Select}
}}
} key
Press to change which setting you are ed-
iting. The current selection is shown by
the indicators above the key:
•Paper Length
•Leading Edge
•Trailing Edge
•Copy Counter
Also used for copying a selected portion
of the original.
12. {
{{
{+}
}}
} and {
{{
{—}
}}
} key
Press to increase the value being edited.
Press to decrease the value being edited.
13. Leading Edge/Trailing Edge/
Copy Counter indicator
Displays the margin settings and the
number of copies made.
14. Roll Feeder indicator
Light up when you select Roll Feeder 1 or
2.
15. {
{{
{Paper Select/Cut}
}}
} key
Use to select the paper feed type such as
Roll feeder 1, 2 and Bypass Tray. Also
press to stop a copy job.
16. {
{{
{Copy Media}
}}
} key
Press to select the type of copy paper you
are using.
The copier will apply more or less heat
accordingly.
• The top indicator-Translucent paper
indicator
• The bottom indicator-Film indicator
17. {
{{
{Emergency Stop}
}}
} key
Press to stop the copying process imme-
diately.
Use if your original is getting stuck in the
copier.
If you stop operation by pressing this
key, remove the original.
18.
Density indicator and {
{{
{i
ii
i}
}}
},
{j
jj
j}
}}
}keys
Shows the density level the copies will
have.
Press the left key to make copies lighter.
Press the right key to make copies darker.
19. {
{{
{Start}
}}
} key
Press to start copying when you select
manual feed mode. Otherwise, the copy
job automatically start after you place
both paper and original. For details about
manual feed mode,
⇒
P.16 “Manual Feed
Mode”
20. Green indicator
Lights up when you select the manual
feed mode.
21. {
{{
{Clear/Stop}
}}
} key
When entering numbers, press to cancel.
While copying, press to stop copying.