Owner's Manual

Copying
18
2
❒ If you select the Bypass table, Center the paper face up on the bypass table
and slide the paper straight into the copier.
E
Set the original guides to match the original size mark. Place the original
face down and slide it straight into the copier along the original guides.
Note
❒ Do not force to remove the original once you set it and if you want to
change the position of your original or set another original. In this case,
press the {Clear/Stop} key to eject the original.
F
If you are ready to make copy, press the {
{{
{Start}
}}
} key.