Specifications

Paper and Other Media
6
•
The size is supported and indicated on the tray dial. Be sure to set the pa-
per size dial to match the actual paper size loaded in the tray.
•
The size is supported but not indicated on the tray dial. You should set the
tray dial to “p”, and select the paper size with the control panel.
•
The size is supported but the paper size should be set with the control pan-
el. There is no dial on the tray.
See p.26 “
Loading Paper in the Bypass Tray”
See p.33 “
Loading Envelopes”
•
The size is supported, but it should be set as a custom size using the con-
trol panel.
The supported size may differ depending on the printer language you use.
Set as a custom size setting using the control panel.
The following sizes are supported:
• Tray 1: approximately 139.7 - 216 mm in width, and 139.7 - 356 mm in
length.
• Bypass Tray: approximately 90 - 216 mm in width, and 139.7 - 432 mm
in length.
Folio (8
1
/
4
× 13)
K 210 × 330 ×
Foolscap (F4, 8
1
/
2
× 13)
K 216 × 330 ×
F/GL (8 × 13) K 203 × 330 ×
Com#10 Env (4
1
/
8
× 9
1
/
2
)
K 104.8 × 241.3 ××
C5 Env (6.38 × 9.02)
K 162 ×229 ××
C6 Env (4.49 × 6.38)
K 114 ×162 ××
DL Env (4.33 × 8.66) K 110 × 220 ××
Monarch Env (3
7
/
8
× 7
1
/
2
)
K 98.4 × 190.5 ××
Custom Size - - ×
16K (7.68 × 10
1
/
2
)
K 195 × 267 ×
Feed direction Size (mm) Bypass Tray Paper Tray (Tray1) Paper Feed Unit (Tray2/3) Envelope Feeder Unit