Service manual

Smart Organizing Monitor (Printer Model)
SM 5-31 G165/G166/G167/G181/G183/G184
Service
Tables
Item Selections Remarks
Media type
Display string only
0: Plain paper 1 mode
1: Plain paper 2 mode
2: Plain paper 3 mode
3: Reserved (not display)
4: Thick stock 1 mode
5: Thick stock 2 mode
6: Thick stock 3 mode (Not
used)
7: Thick stock 4 mode
8: Envelope 1 mode
Please select the media type.
Front (-15 to +15)
This adjusts the transfer roller
current, based on the default value.
The range of adjustment is from -15
[μA] to +15 [μA], in units of 1.
The printer will warm up
automatically after this setting is
changed.
Back (-15 to +15)
This adjusts the transfer roller
current, based on the default value.
The range of adjustment is from -15
[μA] to +15 [μA], in units of 1.
Printer will warm up automatically
after this setting is changed.
Fuser Temperature (-30 to 0)
This adjusts the temperature of the
fusing unit, based on the default
value. The range of adjustment is
from -30 [°C] to 0[°C], the unit is 2.
The printer will warm up
automatically after this setting is
changed. *2
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA