Service manual

Smart Organizing Monitor (Printer Model)
SM 5-33 G165/G166/G167/G181/G183/G184
Service
Tables
Item Selections Remarks
Horizontal (-15 to +15)
step
1.32mm per step. Range is -5mm to
+5mm.
If the machine settings are reset to
the factory defaults, this value does
not change.
The printer will exit the energy saver
state after this setting is changed.
Tray2
Vertical (-15 to +15) step
0.24mm per step. Range is -3.6mm
to +3.6mm
If the machine settings are reset to
the factory defaults, this value does
not change.
The printer will exit the energy saver
state after this setting is changed.
Horizontal
1.32mm per step. Range is -5mm to
+5mm.
If the machine settings are reset to
the factory defaults, this value does
not change.
The printer will exit the energy saver
state after this setting is changed.
Bypass Tray
Vertical
0.24mm per step. Range is -3.6mm
to +3.6mm
If the machine settings are reset to
the factory defaults, this value does
not change.
The printer will exit the energy saver
state after this setting is changed.
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA