Service manual

Service Menu (MF Model)

G165/G166/G167/G181/G183/G184 5-36 SM

5.3.2 MAINTENANCE MODE MENU

Entering the Maintenance Mode Menu

1. Turn on the machine.

2. Press these keys in the following order:

"Clear/Stop", "1", "0", "7" and "Color Start"

3. "Maintenance Mode" is displayed on the LCD.

Selecting an Item

To select an item, press the "Up" or "Down" key.

Going into the Next Level/ Returning to the Previous Level

 To go into the next level of an item, select an item then press the "OK" key.

 To return to the previous level of an item, press the "Return" key.

Exiting the Maintenance Mode Menu

To exit the maintenance mode menu, press the "Clear/Stop" or "Return" key until the

"Ready" display appears.

Menu List

Display Info

Model Name

Displays the Model Name, Depends on Engine

Firmware Settings

CTL FW Ver. Displays the Firmware Version

FAX FW Ver.

Displays the PDL Firmware Version.

(G181 doesn't support this)

MCTL FW Ver. Displays the Engine Firmware Version

FW Ver.

PDL FW Ver.

Displays the PDL Firmware Version.

(G183/184)

Counter Printer Counter

Displays the following counters of the printer

engine.

Total Page/ Color Image/ Black Image

CÓPIA NÃO CONTROLADA