Service manual

Service Menu (MF Model)
G165/G166/G167/G181/G183/G184 5-46 SM
Timeout Length
This setting sets the time-out length for the 1st dial
tone detection. The machine waits for a dial tone
for the specified time and disconnects itself from
the line when no dial tone is input.
[10 Sec (Default)/ 15 Sec/ 20 Sec/ 30 Sec]
BT Setting
DFU
[Off/ On]
BT: Busy tone
BT Frequency
DFU
[300-550 Hz/ 300-650 Hz/ 325-525 Hz/ 340-550
Hz/ 350-500 Hz/ 350-550 Hz/ 375-475 Hz/
380-520 Hz]
BT Level
DFU
[-35 dB/ -36 dB/ -37 dB/ -38 dB/ -39 dB]
BT (Busy Tone)
Detection
BT Cadence
DFU
[0.10/ 0.15/ 0.20/ 0.25/ 0.30/ 0.35/ 0.40/ 0.45/ 0.50/
0.75]
RTN Rate
The machine checks the actual data
reconstruction errors and then transmits an RTN
depending on the decoding error rate that is set by
this setting (Number of lines containing an error
per page / Total number of lines per page).
[10%/ 15%]
V34 Modem
DFU
[Permitted (Default)/ Prohibited]
Comm Settings
V17 Modem
DFU
[Permitted (Default)/ Prohibited]
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA