Service manual

Service Menu (MF Model)

SM 5-47 G165/G166/G167/G181/G183/G184

Service

Tables

Equalizer

These selectors set the equalizer's training level to

be applied if training fails due to poor line

connection.

[Automatic (Default)/ 4 Points/ 16 Points]

Redialing

Resend when a communication error occurs.

[Disabled (Default)/ Not Disabled]

First TX Speed

Sets the first transmission speed choice, before

fallback.

[2400 Bps/ 4800 Bps/ 7200 Bps/ 9600 Bps

/ 12000 Bps/ 14400 Bps/ 16800 Bps/ 19200 Bps/

21600 Bps/ 24000 Bps/ 26400 Bps/ 28800 Bps/

31200 Bps/ 33600 Bps (Default)]

V34 Settings

Symbol Rate

This setting limits the transmission speed range in

V.34 mode by masking the desired symbol rate(s).

[Not Used (Default)/ 3429 Sym/Sec

/ 3200 Sym/Sec/ 3000 Sym/Sec

/ 2800 Sym/Sec/ 2400 Sym/Sec]

Reseller Default

Not Execute Does not reset anything. Returns to the upper level.

Execute

Resets all the settings to the factory defaults except the following.

 Counter for Machine Life

After executing, the initial setup menu starts after the next power-on.

IMPORTANT: See NOTE on the next page.

Rev. 07/05/2009

CÓPIA NÃO CONTROLADA