Service manual

Paper Feed
SM 6-27 G165/G166/G167/G181/G183/G184
Detailed
Descriptions
Section
6.5 PAPER FEED
6.5.1 OVERVIEW
1. Paper Feed Roller
2. Registration Sensor
3. Registration Roller
4. Paper Height Lever
5. Separation Pad
6. Paper End Sensor
This machine has a paper tray (250 sheets) and a by-pass paper feed (single sheet).
The paper feed mechanism uses a friction pad system.
The paper end sensor detects whether paper is installed in the tray and whether the tray is
set in the machine, because this machine does not have a tray set sensor.
This machine also does not have automatic paper size detection. The machine determines
the paper size from the on-off timing of the registration sensor. If the paper type which is
selected at the PC does not match the paper size measured by the registration sensor, the
machine issues a paper jam alert and stops the motors.
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA