Manualshelf

Service manual

ManualsBrandsRicoh ManualsComputer equipmentG165
231232233234235236237238239240
Paper Feed
G165/G166/G167/G181/G183/G184 6-28 SM
6.5.2 DRIVE AND PAPER END DETECTION
Paper Feed
The transport/fusing motor [A] controls the paper feed roller [B] and registration roller [C]
with the paper feed clutch [D], registration clutch [E] and gears. (The transport/fusing motor
also controls the fusing unit and paper exit roller.) The paper feed roller feeds a sheet of
paper to the registration roller [C].
When the registration sensor [F] detects a sheet of paper, the machine makes a paper
buckle at the registration roller to correct paper skew. After that, the registration clutch turns
on, and then the registration roller transports a sheet of paper to the transfer roller unit.
Paper End Detection
There is a paper end sensor [G] in the tray. The feeler drops into the cutout in the bottom
plate and the actuator interrupts the paper end sensor. This sensor also detects whether
the tray is set.
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA