Service manual

Paper Feed
SM 6-29 G165/G166/G167/G181/G183/G184
Detailed
Descriptions
Section
6.5.3 TRAY LIFT
The bottom plate [A] is lifted by the springs [B] in the tray when the tray is inserted in the
machine, and the bottom tray lock lever [C] is released by the projection [D] at the right side
of the tray set location. There is no tray lowering mechanism for these models. Therefore,
you must press the bottom plate down when you insert the tray in the machine.
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA